Husky Plastic Sheeting:
All sizes and thicknesses available.
Made from an advanced material that changes its permeability with the ambient humidity condition, MemBrain acts like a traditional vapor retarder to protect wall cavities, but also allows closed building envelope systems to dramatically increase their drying potential with seasonal climatic changes
Sizes: 8’4”, 9’4”, 10′, or 12′ x 100’
Designed for use as a closure system and vapor seal on all interior and exterior sheathing materials. Comes from HI-cube.
Size: 2″ x 75 yds
Case Qty: 24 Rolls
Manus-Bond 50-A is a high solids, non-drying, self-healing synthetic rubber based sealant for reducing sound and vapor transmission around windows, doors, wall panels, insulated metal panel and partition systems
Size: 28 fl oz
Case Qty: 12 Tubes
Can be used on 3M(TM) Low Pressure Compressed Air Systems. It has a 1/2 inch inner diameter and is equipped with MPT’s on both ends to accept 3/8 inch FPT fittings. This hose can only be used in single lengths. Hoses cannot be combined.
Hose Lengths: 50′ or 100′
Polyurethane expanding foam specially formulated for filling, insulating, and sealing interior and exterior buildings. (For use with Tytan Spray Gun)
Size: 24 oz
Case Qty: 12
Prevents Spray Foam from adhering to most surfaces where the product is applied.
Size: 10.25 oz
Case Qty: 12 Cans
Polyurethane expanding foam that meets requirements for fireblocking penetrations around wires, pipes, ducts and other penetrating items in single family residential construction. (For use with Tytan Spray Gun)
Size: 24oz
Case Qty: 12
Designed to clean, protect and extend the working life of foam guns.
Solvent effective for cleaning spray foam guns.
1 gallon
Color: Clear
Specific Gravity: 1.06
Boiling Point: >392oF
Flash Point: 210oF
Spray Gun designed for single component polyurethane foams.
Sizes: 8” (Standard) or 39” (Long Wand)
Is an environmentally sensible, non-HAPs solvent based cleaner designed to dissolve: and flush part A & B isocyanates polyurethane foam, flexible and rigid elastomer and molded polyurethane foam. Effective for both MDI and TDI esters as well as cured reactive hot melt polyurethane adhesives, and other industrial adhesives. It also removes mixtures of Fiberglass and Polyester Resin, Vinylester and Epoxy Resins.
Non-Flammable • Biodegradable • Recyclable • Low VOC’s • No ODC’s • Mild odor • Low Rate of Evaporation
Size: 1 Gallon
Isocyanates Resin Cleaner is an environmentally safe, non-HAPs, no ODC’s non-flammable. Low emission organic solvent – based multipurpose industrial resin remover. It is highly effective in both flushing and immersion cleaning of single component Isocyanates (part A) and Uncured Reactive Hot Melt Polyurethane Adhesives, Uncured Resins (Epoxy, Polyester, Vinylester, Polyurethane); Adhesives; Pigmented Gel Coats and other coatings including High & Low Solid Aliphatic, Waterborne Epoxy Primers, Polyurethane, Acrylic, Varnish and Alkyl Enamel.
Use this product full strength at room temperature only in an immersion tank application with low agitation or flushing of hoses in a well-ventilated area. If the product is flushed through spray guns, it is imperative to have an adequate exhausted system in place.
Size: 5 Gallon
CIRR D-Bond™ Crystallized isocyanates Resin Remover is a low emission organic solvent-based “Non-Flammable”, Non-HAPs multipurpose industrial resin & coating remover. It is highly effective in immersion cleaning of: Crystallized isocyanates, Cured Urethane (both MDI and TOI Esters and Ethers), Cured Reactive Hot Melt Adhesives, Industrial Resins such as: Polyester, Vinylester, Epoxy and Pigmented Gel Coats, Coatings such as High & Low Solid aliphatic, water born Epoxy Primers, Polyurethane, Acrylic, varnishes and alkyl enamel
Non-Flammable • Recyclable • Low VOC’s • No ODC’s • Mild odor • Low Rate of Evaporation
Size: 1 and 5 Gallon
This kit delivers air to both sides of the facepiece for a comfortable and balanced 3M™ Supplied Air Respirator System. Includes 3M™ Breathing Tube SA-2500, 3M™ Waist Belt GVP-127 and 3M™ Valve SA-1009.
For industrial/occupational use only. Not for consumer sale or use.
Size: 24” x 33”
Case Qty: 50
Size: 24” x 48” or 24”x 72”
Premicote PF is used in the reinforcement of cold process roofing and as a flashing reinforcement with mastics and elastomerics.
Sizes: 4” x 324’ or 40” x 324’
Case Qty: 16 Rolls
This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M(TM) Particulate Filters or Cartridges, to help provide respiratory protection against particulates and/or a variety of gases and vapors.
Sizes: Med, Lg
For industrial/occupational use only. Not for consumer sale or use.
Use on 3M(TM) Full Facepieces 6000 Series to help protect the lens.
Qty: 10/pack
Case Qty: 5 packs
The ADVANZ Lens Covers are designed to fit over all brands of full-face respirators. Like the goggles, just turning the knob allows clear vision. Saving time from cleaning lenses that never seem to clean and saving the cost in replacing them are the reasons that professional sprayers keep coming back for more. With the ADVANZ system, just turn the knob, advancing the film, clearing vision. After 30 frame advances, just throw it away and start with a new pair.
30 Advances/pair
Engineered for maximum comfort, durability and visibility, the Ultimate FX FF-400 is the only respirator with Scotchgard(TM) Protector. This respirator features soft yet durable, silicone material and a large lens for superior peripheral vision.
For industrial/occupational use only. Not for consumer sale or use.
Standard lens covers for use with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.
Qty: 25/pack
Case Qty: 4 packs
Semi-permanent lens covers with Scotchgard(TM) coating to help protect 3M(TM) Ultimate FX Full Facepiece Reusable Respirator Series FF-400 lens. For temporary use.
Qty: 5/pack
Case Qty: 4 packs
This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.
For industrial/occupational use only. Not for consumer sale or use.
This economical disposable N95 particulate respirator is designed to help provide reliable worker respiratory protection against certain non-oil based particles.
Qty: 20/Box
Case Qty: 8 Boxes
For industrial/occupational use only. Not for consumer sale or use.
NIOSH approved against certain organic vapors. Use with 3M(TM) Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
Qty: 2/pack
Case Qty: 30 packs
For industrial/occupational use only. Not for consumer sale or use.
Advanz Goggles are used for spray painting, spray foam installation or wherever “back spray” or vision is a problem. When spray paint or foam obstructs view, advance film for clear vision. Each goggle contains enough film for 30 frame advances. When film is used simply throw-away.
30 Advances/pair
Used to hold 3M(TM) Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M(TM) Respirators 5000 Series and 3M(TM) Cartridges 6000 Series and 3M™ Filter Adapter 603.
Tyvek coverall, zipper, attached hood and non skid boots, elastic wrists and ankles.
Sizes: XL-3XL
Qty: 25/box
Nitrile coated nylon gloves.
Qty: 100/Box
Case Qty: 10 Boxes
Brown Jersey Gloves
Qty: 12 pack
Suburban sidewinder hose sleeve comes in insulated and non-insulated. The Radiant Shield liner offers thermal properties engineered to meet application needs when working in extreme cold and/or abrasive environments. While the non-insulated sleeve offers superior protection of spray hose.
We’re specialists in metal building insulation with a strong focus on commercial and agricultural products. Metal building insulation can be delivered to you unfaced, with a Simple Saver System or with a variety of laminated facings that best suit your needs.
AMD Distribution’s dedication to the residential insulation business allows us to supply quality products from major trusted manufacturers while being a one-stop distributor for your insulation needs.
AMD Distribution’s full spray foam product line, along with training and problem solving, allows us to be the leader in the field. Our newly established lead program will bring work to the spray foam contractor in their coverage area.
What kind of distributor would we be if we couldn’t get you the equipment you need to use our products? AMD Distribution works closely with equipment manufacturers to ensure you get the right equipment to fit your production needs.
