AMD Distribution strives to provide you with everything you need to help you succeed. Below you will find some literature that has more in depth information on the products we provide.
MBI
Residential
Spray Foam
Catalogs
Clear Reinforced Poly
Used for temporary applications that require lightweight yet highly tear-resistant film such as building enclosures and abatement applications.
Sizes: 6.167′, 8′, 10′, 12′, 16′, 20′, 32′, or 40’ x 100’
CT Membrain
Made from an advanced material that changes its permeability with the ambient humidity condition, MemBrain acts like a traditional vapor retarder to protect wall cavities, but also allows closed building envelope systems to dramatically increase their drying potential with seasonal climatic changes
Sizes: 8’4”, 9’4”, 10′, or 12′ x 100’
Sheathing Tape
Designed for use as a closure system and vapor seal on all interior and exterior sheathing materials.
Size: 1 7/8” x 55 yds
Case Qty: 16 Rolls
Supplied Air Hose (LP)
Can be used on 3M(TM) Low Pressure Compressed Air Systems. It has a 1/2 inch inner diameter and is equipped with MPT’s on both ends to accept 3/8 inch FPT fittings. This hose can only be used in single lengths. Hoses cannot be combined.
Hose Lengths: 50′ or 100′
Aluminum Foil Tape
Primarily used as a vapor sealing tape for fiberglass ductboard, sheet metal ducts and FSK systems.
Size: 3” x 50 yds
Waste Removal Bag
4’ x 6’ waste removal bag with an 11” collar capable of holding up to 75 cubic feet of waste/debris.
Sold Individually.
Tytan Gun Foam
Polyurethane expanding foam specially formulated for filling, insulating, and sealing interior and exterior buildings. (For use with Tytan Spray Gun)
Size: 24 oz
Case Qty: 12
Pura Insulation Release
Prevents Spray Foam from adhering to most surfaces where the product is applied.
Size: 10.25 oz
Case Qty: 12 Cans
Intec Mark II Blowing Hose
Sizes 3” x 50’ or 4” x 50’
Tytan Fire Foam
Polyurethane expanding foam that meets requirements for fireblocking penetrations around wires, pipes, ducts and other penetrating items in single family residential construction. (For use with Tytan Spray Gun)
Size: 24oz
Case Qty: 12
Can Foam Gun Cleaner
Designed to clean, protect and extend the working life of foam guns.
Dynasolve CU-6
Solvent effective for cleaning spray foam guns.
1 gallon
Color: Clear
Specific Gravity: 1.06
Boiling Point: >392oF
Flash Point: 210oF
Double Sided Tape
Venture Tape 514CW is a double coated polyester film tape coated on both sides with an aggressive acrylic pressure sensitive adhesive (PSA). A high performance splicing tape specifically designed for splicing in continuous web processes, Venture Tape 514CW is especially suitable for corrugated paper applications.
Sizes: 1 ½” x 60 yds or 360 yds
Case Qty: 32 (60yds), 8 (360 yds)
Foam Gun
Spray Gun designed for single component polyurethane foams.
Sizes: 8” (Standard) or 39” (Long Wand)
GSP Surf X Flush 2000
Is an environmentally sensible, non-HAPs solvent based cleaner designed to dissolve: and flush part A & B isocyanates polyurethane foam, flexible and rigid elastomer and molded polyurethane foam. Effective for both MDI and TDI esters as well as cured reactive hot melt polyurethane adhesives, and other industrial adhesives. It also removes mixtures of Fiberglass and Polyester Resin, Vinylester and Epoxy Resins.
Non-Flammable • Biodegradable • Recyclable • Low VOC’s • No ODC’s • Mild odor • Low Rate of Evaporation
Size: 1 Gallon
GSP NZD ISO Flush
Isocyanates Resin Cleaner is an environmentally safe, non-HAPs, no ODC’s non-flammable. Low emission organic solvent – based multipurpose industrial resin remover. It is highly effective in both flushing and immersion cleaning of single component Isocyanates (part A) and Uncured Reactive Hot Melt Polyurethane Adhesives, Uncured Resins (Epoxy, Polyester, Vinylester, Polyurethane); Adhesives; Pigmented Gel Coats and other coatings including High & Low Solid Aliphatic, Waterborne Epoxy Primers, Polyurethane, Acrylic, Varnish and Alkyl Enamel.
Use this product full strength at room temperature only in an immersion tank application with low agitation or flushing of hoses in a well-ventilated area. If the product is flushed through spray guns, it is imperative to have an adequate exhausted system in place.
Size: 5 Gallon
FSK (Foil Skrim Repair Tape)
Closure system and vapor seal on FSK faced metal building insulation.
Size: 3: x 50 yds
GSP CIRR D Bond
CIRR D-Bond™ Crystallized isocyanates Resin Remover is a low emission organic solvent-based “Non-Flammable”, Non-HAPs multipurpose industrial resin & coating remover. It is highly effective in immersion cleaning of: Crystallized isocyanates, Cured Urethane (both MDI and TOI Esters and Ethers), Cured Reactive Hot Melt Adhesives, Industrial Resins such as: Polyester, Vinylester, Epoxy and Pigmented Gel Coats, Coatings such as High & Low Solid aliphatic.. water born Epoxy Primers, Polyurethane, Acrylic, varnishes and alkyl enamel
Non-Flammable • Recyclable • Low VOC’s • No ODC’s • Mild odor • Low Rate of Evaporation
Size: 1 and 5 Gallon
White Reinforced Poly
For applications requiring puncture resistance and high tear strengths.
Sizes: 6.167′, 12′, 20′, or 36′ x 100′; 36′ x 110′
Cardboard Vent Chutes
Size: 24” x 33”
Case Qty: 50
Styro Vent Chutes
Size: 24” x 48” or 24”x 72”
Smooth Tuff Face Repair Tape
Designed for smooth vinyl faced fiberglass insulation. It matches the smooth tuff face product we offer.
Size: 3” x 50 yds
Case Qty: 16 Rolls
Thermal Break Tape
Grey vinyl foam coated with a specially formulated pressure sensitive adhesive system applied. Designed for use as a vapor seal where larges spaces occur & is also ideal for use as a lap joint seal in corrugated metal building panels or prefabricated wall panels.
Sizes: 1/8” x 2” x 75’ (6/Case), 1/8” x 3” x 75’ (4/Case), or 1/4” x 3” x 50’ (4/Case)
2″ Plastic Plugs
Regular plastic plugs with a 3/8″ shank and two clips on each side for firm grip in aluminum, vinyl and steel siding. It also has the paintable matte finish.
Sold Individually.
Bag Qty: 250
Mesh Netting
Serves as a temporary face before installing sheetrock or as a backer to hold wet spray.
Size: 1/6” x 8’ x 125’
Case Qty: 16 Rolls
Insulweb
Go-to fabric whether you are damp spraying or dense packing cellulose, blowing or loose-filling fiberglass or any similar application.
Sizes: 8’ x 750’ or 9’ x 750’
Pallet Qty: 9 Rolls
VRR+ Repair Tape
A tri-directional scrim reinforced white polypropylene/scrim/metallized polyester lamination coated with a high tack acrylic pressure sensitive adhesive system that combines superior quick stick along with excellent long term aging.
Size: 3” x 50 yds
Case Qty: 16 Rolls
Woven Repair Tape
Patch tape for bi-directional woven fabrics. This would be the repair tape for the Mai Weave Tuff Face product we offer.
Size: 4” x 55 yds
Cast Qty: 15 Rolls
Reinforcing Polyester Fabric
Premicote PF is used in the reinforcement of cold process roofing and as a flashing reinforcement with mastics and elastomerics.
Sizes: 4” x 324’ or 40” x 324’
Case Qty: 16 Rolls
Versi Foam
Recommended for most commercial and industrial applications, the standard formula is ideal for air sealing, wall or ceiling insulation, condensation control, sound dampening, structural enhancement, tank and pipe insulation, roof repair, marine flotation, truck/trailer insulation, sculpting and molding, pool and spa insulation, and much more
All available in Standard or Fire Rated
Sizes: 12 BD FT, 200 BD FT, or 600 BD FT
Full Face Mask
This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M(TM) Particulate Filters or Cartridges, to help provide respiratory protection against particulates and/or a variety of gases and vapors.
Sizes: Med, Lg
For industrial/occupational use only. Not for consumer sale or use.
Tears Offs
Use on 3M(TM) Full Facepieces 6000 Series to help protect the lens.
Qty: 10/pack
Case Qty: 5 packs
ADVANZ Lens Covers
The ADVANZ Lens Covers are designed to fit over all brands of full-face respirators. Like the goggles, just turning the knob allows clear vision. Saving time from cleaning lenses that never seem to clean and saving the cost in replacing them are the reasons that professional sprayers keep coming back for more. With the ADVANZ system, just turn the knob, advancing the film, clearing vision. After 30 frame advances, just throw it away and start with a new pair.
30 Advances/pair
Ultimate FX
Engineered for maximum comfort, durability and visibility, the Ultimate FX FF-400 is the only respirator with Scotchgard(TM) Protector. This respirator features soft yet durable, silicone material and a large lens for superior peripheral vision.
For industrial/occupational use only. Not for consumer sale or use.
Lens Covers
Standard lens covers for use with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.
Qty: 25/pack
Case Qty: 4 packs
Semi Permanent Lens Protector
Semi-permanent lens covers with Scotchgard(TM) coating to help protect 3M(TM) Ultimate FX Full Facepiece Reusable Respirator Series FF-400 lens. For temporary use.
Qty: 5/pack
Case Qty: 4 packs
Half Face Mask (3M 6300)
This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.
For industrial/occupational use only. Not for consumer sale or use.
Particulate Respirator
This economical disposable N95 particulate respirator is designed to help provide reliable worker respiratory protection against certain non-oil based particles.
Qty: 20/Box
Case Qty: 8 Boxes
For industrial/occupational use only. Not for consumer sale or use.
Organic Vapor Cartridge
NIOSH approved against certain organic vapors. Use with 3M(TM) Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
Qty: 2/pack
Case Qty: 30 packs
For industrial/occupational use only. Not for consumer sale or use.
Advanz Goggles
Advanz Goggles are used for spray painting, spray foam installation or wherever “back spray” or vision is a problem. When spray paint or foam obstructs view, advance film for clear vision. Each goggle contains enough film for 30 frame advances. When film is used simply throw-away.
30 Advances/pair
Insul-Hold
Insulation support system that fastens to metal framing, steel, concrete, masonry, nails, or screws. The 2 ½” arrow prongs are bent away from the wall and the insulation is pushed onto the prongs.
Size: 1” x 100’ (Thickness .032 (20 gage))
White Metal Banding
White Metal Banding: Supports insulation and vapor barriers in metal buildings’ applications on the underside of roofs and inside walls.
Sizes: 1” x 1000’ or 1 ¾” x 1000’ (Thickness .015)
Filter Retainers
Used to hold 3M(TM) Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M(TM) Respirators 5000 Series and 3M(TM) Cartridges 6000 Series and 3M™ Filter Adapter 603.
Tek Screws
Self Tapping screws
Qty: 250/pack, 10 packs/case
Hooded & Booted Coveralls
Tyvek coverall, zipper, attached hood and non skid boots, elastic wrists and ankles.
Sizes: XL-3XL
Qty: 25/box
Nitrile Gloves
Nitrile coated nylon gloves.
Qty: 100/Box
Case Qty: 10 Boxes
Brown Jersey Gloves
Brown Jersey Gloves
Qty: 12 pack
Spray Adhesive
Develops fast, strong bonds to most materials including duct board, insulation and sheet metal.
Size: 12 oz
Case Qty: 12 Cans
K-GRIP 514
K-GRIP 514 is a high performance synthetic polymer that gives exceptional performance characteristics of high heat resistance, long open time and high mileage yields due to its high solids. K-GRIP 514 is excellent for applications requiring a product with good temperature performance such as metal, foam fabricating, mattress, furniture, headliners and carpeting
Size: 1 Gal
Particulate Filter
NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M(TM) Respirators 5000 Series or 3M(TM) Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M(TM) Filter Retainer 501.
Qty: 10/pack
Head Socks
Get maximum skin coverage when you pair a head sock with your other protective equipment.
Qty: 12/pack
Suburban Sidewinder Hose Sleeve
Suburban sidewinder hose sleeve comes in insulated and non-insulated. The Radiant Shield liner offers thermal properties engineered to meet application needs when working in extreme cold and/or abrasive environments. While the non-insulated sleeve offers superior protection of spray hose.
