Wall Foam

Diamondback Closed Cell

Diamondback Closed Cell provides excellent thermal performance, air sealing, vapor protection and structural integrity. Reducing the need for separate air and vapor barriers, it keeps projects on schedule, so you can efficiently deliver a quieter, healthier and more comfortable indoor environment.

Product Application Guide

Demilec Sealection NM Open Cell

No more waiting for your open cell foam to mix prior to spraying. Sealection NM is ready to spray when you are. We know jobsite time is crucial and losing time on mixing is money lost. Changeovers and faster setup add to a more efficient job with less hassle or room for error.

No mixing enables quicker changeovers and faster setup times
Cuts Energy bills by up to 50%*
Reduces dust and allergens
Does not deteriorate or decompose

Demilec Agribalance (Open Cell)

Agribalance® merges the high-performing, open-cell spray foam insulation with natural, renewable oils. This allows architects, builders, contractors, and homeowners to achieve new standards of performance, quality, and energy efficiency.

This high R-value of 4.45 at 1 inch, polyurethane insulation expands to seal cracks, gaps, and voids in attics, walls, crawl spaces, and ceilings. Agribalance is a three-quarter pound density foam that reduces air leakage by improving energy efficiency, and reducing moisture intrusion and outside contaminants such as dust, dirt, and allergens. As a result, builders can generally install smaller, more energy-efficient HVAC systems and achieve similar, or superior comfort compared to traditionally insulated structures which require a larger, less efficient HVAC system – resulting in higher energy costs.

Since it tightly bonds to surfaces in the attic, ceiling, and walls, extraneous noise is also minimized.

*Must have signed agreement on file before you may purchase these products.

Demilec Sealection 500 (Open Cell)

Sealection® 500 is an environmentally-friendly product, it delivers superior performance, energy savings, and is an excellent return on investment for architects, builders, contractors, and homeowners, making it the ideal choice for insulation.

Sealection 500 is a cutting-edge formula of open-cell spray foam insulation, which expands 120 times its liquid volume to insulate and seal all cracks, gaps, and joints with a single application, and is easy to install and finish. It has dramatically increased energy efficiency for millions of residential and commercial property owners. This translates to a high-performing product for builders, shorter application, and finishing times for contractors, and lower energy bills for homeowners and commercial building owners.

Sealection 500 is a spray-applied adhesive, which once applied, expands in place using water-blown technology, without CFCs, HCFCs, or ozone-depleting chemicals. Unlike traditional fiberglass insulation, Sealection 500 will maintain its performance; time and temperature have no effect on the spray foam insulation’s R-value of 3.81 at 1 inch. Sealection 500 never deteriorates or decomposes. The product retains its shape and half-pound density over time, and never settles or compacts.

*Must have signed agreement on file before you may purchase these products.

JM Corbond III (Closed Cell)

Recommended for new construction, basements and attics, JM Corbond III® SPF provides significant R-value plus seamless air sealing and moisture control in a single install step.

CONTRACTORS BROCHURE

PDS

SDS A

SDS B

JM Open Cell

A lower density, nonstructural SPF insulation, JM Open-cell Spray Foam delivers incredible yield at an excellent value while still providing important air isolation, R-value and acoustical performance.

CONTRACTORS BROCHURE

PDS

MSDS A

MSDS B

Versi Foam

Recommended for most commercial and industrial applications, the standard formula is ideal for air sealing, wall or ceiling insulation, condensation control, sound dampening, structural enhancement, tank and pipe insulation, roof repair, marine flotation, truck/trailer insulation, sculpting and molding, pool and spa insulation, and much more

All available in Standard or Fire Rated

Sizes: 12 BD FT, 200 BD FT, or 600 BD FT

Quick-Shield 118

QUIK-SHIELD® 118 is an ultra-efficient, closed-cell spray foam insulation. It is ideal for high–performance and air barrier insulation applications in residential (IRC) and commercial (IBC) construction.

Technical Data Sheet

Safety Data Sheet

InsulStar Spray Foam 11-016

InsulStar® is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam system. This NCFI system has been formulated with highly insulating HFC-245fa as the blowing agent. The InsulStar® insulation system is suitable for application on the exterior or interior side of Type I, II, III, IV, & V buildings as well as other insulation applications. It complies with AC 377 and ASTM C1029. InsulStar® is certified for application in ABAA projects.

Data Sheet

InsulStar Spray Foam 11-033

11-033 InsulStar®1.7 is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam system. This system has been formulated with highly insulating HFO as the blowing agent. This spray foam is suitable for interior building insulation, air barrier, and moisture vapor retarder applications in Type I, II, III, IV and V construction.

Data Sheet

InsulBloc Spray Foam 11-017

InsulBloc is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam system. This NCFI system has been formulated with highly insulating HFC-245fa as the blowing agent. The InsulBloc® insulation system is suitable for application on the exterior or interior side of Type I, II, III, IV, & V buildings as well as other insulation applications. It complies with AC 377 and ASTM C1029. InsulBloc is certified for application in ABAA projects.

Data Sheet

Nexseal 2.0 HFC, 2.0 HFO 2”, 2.0 LE HFO

Nexseal™ spray foam insulation is a spray-applied, two component, closed cell polyurethane foam insulation system compliant with ASTM C-1029 Type II foams.

Technical Data Sheet

Safety Data Sheet

Evaluation Report

SERVICES WE PROVIDE

Metal Building

We’re specialists in metal building insulation with a strong focus on commercial and agricultural products. Metal building insulation can be delivered to you unfaced, with a Simple Saver System or with a variety of laminated facings that best suit your needs.

Residential Insulation

AMD Distribution’s dedication to the residential insulation business allows us to supply quality products from major trusted manufacturers while being a one-stop distributor for your insulation needs.

Spray Foam

AMD Distribution’s full spray foam product line, along with training and problem solving, allows us to be the leader in the field. Our newly established lead program will bring work to the spray foam contractor in their coverage area.

Equipment

What kind of distributor would we be if we couldn’t get you the equipment you need to use our products? AMD Distribution works closely with equipment manufacturers to ensure you get the right equipment to fit your production needs.